Standard equipment includes 5 adjustable clamping arms and waste slitters with holders. Once the material (square-cut sheets) is inserted and the protective plexiglass door is closed, the punching stroke is activated – on model A by closing the protective door manually, on model A+P a push-button control closes the door pneumatically.
On model AL the punching stroke starts when the electronic safety light barrier is activated.
Standard equipment includes 5 adjustable clamping arms and waste slitters with holders. Once the material (square-cut sheets) is inserted and the protective plexiglass door is closed, the punching stroke is activated – on model B by closing the protective door manually, on model B+P a push-button control closes the door pneumatically.
Standard equipment includes 5 (for BL) or 6 (for BLS) adjustable clamping arms and waste slitters with holders. Once the material (square-cut sheets) is inserted the punching stroke is released when the safety light barrier is activated.
The machine with counter-pressure device is especially used when working with plastic material (PE or PP foil) for inmould labels.
The machine also produces square-cut labels,– especially narrow labels fed in double rows, side by side. For this purpose a straight die is used.
In Line Production of Labels. Efficiency through interlocking. This Line is particularly suited to high volume production.
Maximum output from minimum area The Busch table banding machine handles difficult work with ease. Suited to different production requirements because of its mobility.
A new model - designed for larger banding formats. The machine has a larger format compared to series TB 24 and is equipped with a closed tape guide.
Especially suitable for folded products with automatic feeding for banding print products of all types. The ideal solution behind a folding machine with shingle delivery.
The space-saving Multiple Bander is used for banding rows of paper piles, such as labels, square-cut on a guillotine.
Low priced but efficient. Used just as a turning unit or for turning, airing, jogging and aligning only for turning (without airing), with fixed control desk.
Low priced but efficient. Used just as a turning unit or for turning, airing, jogging and aligning only for turning (without airing), with fixed control desk.
SPEEDTURNER® - powerful and efficient -
For turning, airing, aligning and jogging with airing (1 blower), pressure control flaps, regulation of air volume (hand lever), slewable control desk, adjustable aligning gauge, tilting (15°)
SPEEDTURNER® - powerful and efficient -
For turning, airing, aligning and jogging with airing (1 blower), pressure control flaps, regulation of air volume (hand lever), slewable control desk, adjustable aligning gauge, tilting (15°)
Powerful and efficient SPEEDTURNER® with enlarged opening width (2000 mm) for higher piles, safety light barriers, manually slewable aligning gauge (adjustable), pressure control flaps, airing with a second blower for increased airing power, tilting (15°), slewable control desk, adjustable jogging, electrical air volume regulation.
In modular construction from 6 stations onward in flat or high pile design as a stand alone machine or linked to a stich-fold-trim unit.
KF 110, KF 145 and KF 175 on BUSCH punches.
KF 110, KF 145 and KF 175 combined with preliminary cross conveyor HF 00 or HF 35.
Waste conveyors KF 110-80, KF 145-80 and KF 175-80 can be installed without a preliminary cross conveyor, if the three-knife trimmer is equipped with an internal conveyor.
For guillotines with automatic waste removal device (ASE). The waste is discharged onto the initial cross conveyor (HF) installed under the guillotine. From here the waste is conveyed up (SF) into a bin.
Waste conveyors for the removal of cut waste into a bin. The conveyor is positioned below the stripping unit of the flat-bed die-cutter..
Simply Give Us A Call 513-752-2337
Graph Expo, Chicago 2011
July 15, 2011
CDR Graphics will be showing this year September 11th-14th at the Graph Expo in Chicago, Illinois...
CDR Graphics Re Locates in Batavia, Ohio
February 27, 2011
CDR Graphics New Location in Batavia, Ohio offers a product showroom and testing facility...
